Drain Tiles Installation, What Does it Entail? Insights from a West Chicago Waterproofing Company

drain-tile-installation-west-chicago

When it comes to basement waterproofing, few entities are as important as drain tiles. Drain tiles help to funnel groundwater away from the foundations of their corresponding homes, reducing structural deterioration over time.

Are you interested in installing drain tiles in West Chicago? Wondering what the drain tile installation process entails? This article has all the information you’ll need to know.

(more…)

Basement Waterproofing Company in Lake Forest, IL: Understanding Drain Tile

drain-tile-installation-lake-forest

There is no shortage of entities that can help to waterproof basements in Lake Forest, Illinois. Though the sump pump is the most popular method, there are other effective methods as well, such as drain tile.

Looking to learn a little more about drain tile? If so, you’re in the right place. Here is everything you’ll need to know.

What is the Purpose of Drain Tile?

Simply put, the purpose of drain tile is to catch water before it enters a basement, and then filter that water away from the basement. When installed correctly, it can go a long way in keeping a basement dry.

It’s important to note that drain tile isn’t actually tile at all. It’s actually a system of plastic pipes, all of which work together to filter water to the correct channels. Often connected to the sump basin, drain tile is one of the most effective basement waterproofing entities in existence.

Installing Drain Tile

Drain tile can be installed on both the interior and exterior of a home. Below, we’re going to discuss both the interior and exterior installation processes.

Interior Installation

Interior installation begins with the digging of a hole. This hole is dug in the corner of the basement, and it generally measures in at around 12 inches x 18 inches. It usually requires that the cement floor is broken into pieces.

Next, a trench will be dug along the basement wall. This trench will be about 10 inches deep and will connect to the sump basin. If there is no sump basin in existence, one will have to be dug.

After the trench has been dug, the waterproofing specialist will place an absorbent gravel at the bottom of it. Next, the drain tile will be laid down upon the gravel, extending along the entirety of the trench.

Once the drain tile has been laid, it will be covered with more gravel, enough to even up the trench to ground level. Then, a mat will be placed over the drain tile and gravel, providing it with additional absorbency.

Finally, cement will be laid over the trench, locking everything in place and ensuring that it has no wiggle room. With that, the drain tile will have been installed.

Exterior Installation

Installing exterior drain tile is similar to installing interior drain tile. However, there are some key differences.

First off, when installing exterior drain tile, utility companies will need to be called to ensure that there are no utility lines in proximity of the spot where the tile is being installed. If there are no utility lines, the installation will begin.

The installation begins with the digging of a trench at the footer of the house. After this trench has been dug, plywood will be inserted into it, sloping in a downward direction toward the sump basin.

Next, the drain tile will be laid down on top of the plywood. Then, stone and gravel will be added, completely surrounding the drain tile. Once the gravel has been filled to the top of the trench, an absorbent mat will be placed on top of it.

Finally, the trench will be covered with soil, effectively burying the drain tile underground. At this point, the installation will be completed.

Looking to Install Drain Tile in Lake Forest?

Are you interested in installing drain tile in your home? Looking to install drain tile in Lake Forest, Illinois, specifically? The waterproofers with ULB-DRY Waterproofing are the people to call.

Our team of seasoned waterproofing specialists has installed drain tile in countless basements throughout the Lake Forest area. We can complete your project in a quick, efficient, and professional manner.

Contact us now to get the process started!

Basement Waterproofing Services in Hinsdale: Understanding the Need for Drain Tiles

When it comes to basement waterproofing entities in Hinsdale, Illinois, there are two components that reign supreme. One of these components is the sump pump. The other is drain tile.

In this article, we’re going to focus on drain tiles, discussing its origin and its purpose, as well as the different types of drain tiles that are used to waterproof a Hinsdale basement. Let’s begin!

(more…)

Basement Waterproofing in Des Plaines, Illinois: Understanding Drain Tile

As you might know, basements generally require a little more attention than other rooms. The reason for this? They’re exceedingly vulnerable to moisture. This is why basement waterproofing in Des Plaines is so important. By waterproofing your basement, you can drastically improve both its functional and aesthetic qualities.

There are a number of different basement waterproofing implements that you can utilize. One of the most common is drain tile.

Not sure what drain tile is? Interested in learning a little more about it? Keep on reading! This blog post will have everything you need to know.

What is Drain Tile Used For?

basement-water-seepageAs rain falls, water seeps down into the ground, traveling further and further until it reaches an endpoint. In many cases, unfortunately, this endpoint is the inside of someone’s basement.

To defend their basements against groundwater, many homeowners choose to install basement waterproofing systems. These systems are designed to prevent water from seeping in through basement walls or foundational cracks.

Drain tile is a key component in any basement waterproofing system. These tiles are buried underground, and are used to funnel ground water away from homes. Often working in tandem with sump pumps, they go a long way in keeping basements dry. Most typically made out of PVC pipe, drain tile essentially act like mini sewers for your basement.

How is Drain Tile Installed?

Drain tile can be installed on both the interior and exterior of your home. While interior and exterior drain tile have essentially the same installation processes, there are small differences between the two. These differences will be discussed below.

Interior Installation

When installing interior drain tile, the concrete in your basement will be broken so that a trench can be dug. Generally, a deep hole known as a sump basin will also be dug. This hole is used to collect excess amounts of water that flow in through the drain tile.

After a trench has been dug, a line of PVC pipe will be laid in the trench. This pipe will be connected to the sump basin, collecting any water that is pumped out from the basin.

The pipe will then need to be covered up. This is generally done with absorbent gravel and an absorbent fabric mat. Once covered with these materials, fresh cement will be poured over the pipe, solidifying it in one place.

Exterior Installation

In most cases, exterior drain tile installation follows the same general pattern as discussed above. However, when installing exterior drain tile, there is one extra thing to be mindful of: utility implements. Power lines and water pipes that are buried in the ground could possibly be stricken when digging around your house. The safest way to avoid this is by checking with the city before digging.

The remainder of the installation is carried out the same way as interior installations. PVC pipe will be laid. A sump basin will be created. Absorbent gravel, absorbent mats, and cement will then be laid over the pipe to ensure that it remains in one place.

After this is complete, your drain tile should operate effectively. The vast majority of your groundwater should then funnel to your sump basin.

Looking for Drain Tile Installation in Des Plaines?

Are you interested in installing drain tile in your basement? In need of drain tile installation services in Des Plaines, Illinois, specifically? The basement waterproofing experts at ULB-DRY are the people to call.

 

Over the years, we’ve installed drain tile in a number of basements throughout the Des Plaines area. We would love to make your basement the next.

 

Contact ULB-Dry now to schedule an appointment!

Everything You Need to Know About Drain Tiles in Park Ridge

Moisture can absolutely destroy a basement, resulting in mold growth, musty smells, and an overall undesirable environment. For this reason, it’s highly advised that you waterproof your Park Ridge, Illinois basement.

While a number of devices can be used to waterproof your basement, one of the key devices is drain tile. Want to learn a little more about drain tile? You’re in the right place. This blog post has everything that you need to know.

What Do Drain Tiles Do?

drain-tilesWhen water seeps down into the ground, it runs the risk of also seeping down into your basement. Fortunately, after this water has seeped down into the ground, there is a way to direct it away from your basement or into a sump basin: drain tile.

Drain tile systems can be installed both inside and outside of your basement. These systems typically consist of a series of PVC pipe that is laid just under the soil or floor at the perimeters of your basement walls.

If you want to keep your basement dry, it’s highly recommended that you install a drain tile system. Drain tile systems are a highly effective way of redirecting unwanted water away from your basement.

The Drain Tile Installation Process

To help you understand what drain tile installation entails, we will discuss the process below. There are two main processes: one for interior installation and one for exterior installation.

Interior

Interior drain tile installation begins with the breaking of concrete in your basement. Enough concrete is broken so that a deep hole called a sump basin is produced. Generally, this hole measures in at approximately 12 inches x 18 inches, and is dug in the corner of your basement.

After this hole has been dug, a narrow, moat-like trench will be dug out of the floor around the inside of your house. Usually, this trench will measure in at around 10 inches deep. Once the trench exists, piping will be placed into it, which will connect to the hole that was dug in your basement.

Next, the trench will have to be covered. It is usually covered with a form of gravel that is designed to be absorbent. This gravel is placed both above and below the drain tile.

Once this has been done, a mat will be placed over the piping. This is used for draining purposes. To finish the process, this mat will be covered in cement.

Exterior

Exterior drain tile installation is very similar to interior installation. The only big difference between the two is that, when a trench is dug for exterior drain tile, it is dug on the outside of your house, and not within your basement walls. Because of this, it is necessary for the installer to check for the existence of utility lines and pipes below the surface.

The rest of the process goes the same. You will then have a sump basin dug in your basement. This sump basin will connect to your drain tile, which will run down from the surface of the earth to your basin.

To hold everything in place, your drain tile will be surrounded by gravel, a drainage mat, and cement.

Looking to Install Drain Tile in Park Ridge, Illinois?

Are you interested in installing drain tile in your basement? Looking for drain tile installation in Park Ridge, Illinois? If so, the people at ULB-DRY Waterproofing are the company you want to see.

With over 25 years of waterproofing experience on our side, we know everything there is to know about installing drain tile systems. We can have you drain tile set up in no time.

Contact us today to start the process.

What Does Naperville Drain Tile Installation Entail?

While a number of basement waterproofing methods have been devised in order to prevent water from seeping into basements, water still tends to find a way. Though we can’t always keep water from coming into our basements, we can do something to get it out of our basements in a timely manner.

A drain tile will collect any standing water which enters your basement, flushing it back outside where it belongs. Thinking about having a drain tile installed? Wondering what drain tile installation entails in Naperville? Read on to find out! (more…)