Basements are perpetually vulnerable to water damage. After all, they do exist underground, where rainwater collects in great volume. It’s generally just a matter of time before this rainwater makes its way inside a home.
Fortunately, it’s possible to combat basement moisture. All you need to do is make use of basement waterproofing services. Are you curious about the specifics of these services? Then read below. Here are five types of basement waterproofing services in Wilmette, Illinois:
1. Sump Pumps
One of the primary elements of any basement waterproofing system is the sump pump. Sump pumps are meant to lower water levels around the outside of a basement, thereby preventing flooding.
Many homeowners opt for just a single sump pump. Note, though, that in the event of a power outage, it’s a good idea to have a battery-powered backup available as well. This way, if a severe storm causes water levels to rise rapidly, you’ll still have a functional sump pump that can keep your basement dry when the power goes out.
2. Drain Tiles
Another way to keep water levels down around the outside of a basement is to install drain tiles. Drain tiles are essentially just underground drainage pipes. They collect water, then send it away from the home’s foundation. In doing so, they lower hydrostatic pressure around the home, reducing the risk of foundation cracks.
3. Foundation Crack Repair Services
Over time, as a home’s foundation is exposed to groundwater, it can start to deteriorate, resulting in cracks. These cracks start out small, but they eventually grow much larger over time. In doing so, they reduce the structural integrity of their foundations, while also allowing groundwater to seep through them. As you might expect, this spells serious trouble for a home.
For this reason, it’s important that you repair any cracks in your home’s foundation on a regular basis. Repairing your foundation cracks not only helps to keep your basement dry, but it also sures up the strength of your foundation as a whole.
4. Downspout Extensions
When rain or snow hits a home’s roof, it eventually slides down into the corresponding gutter system. Once there, it travels to the downspouts, which eventually empty on the ground directly adjacent to the home.
The problem with this is that it can cause substantial amounts of water to pool right next to the home’s foundation. What happens when water pools around a foundation? It applies enormous pressure against it, eventually resulting in foundation cracks. Then, the water is able to seep through those cracks, resulting in water damage.
Want to prevent water from collecting right next to your foundation? The key is to install downspout extensions. These are essentially just tubes that you place on the ends of your downspouts. They provide additional length to the downspouts, ensuring that the water is emptied farther away from your foundation.
5. Crawl Space Encapsulations
Crawl spaces need attention too. If they’re not properly waterproofed, they can become inundated with dust and mold. This is why it’s so important to encapsulate a crawls pace. A crawl space encapsulation will seal off your crawl space from potential water damage, keeping dust and mold at bay.
Need Basement Waterproofing Services in Wilmette?
Are you interested in waterproofing your basement? Do you need basement waterproofing services in Wilmette? If so, we here at ULB-Dry Waterproofing are the people to see.
We have over 25 years of basement waterproofing experience on our side. Regardless of your waterproofing needs, our team can accommodate you.
Contact us today to discuss your needs!